Chinese (Simplified) Greek Italian Japanese Portuguese Russian Spanish

[FSX] Aide Cockpit 3D

Voir le premier message non lu • 7 messages • Page 1 sur 1

Aide Cockpit 3D

Message non lupar TURKISH AIRLINES » 06 Fév 2012, 01:31

Bonsoir amis Rikonooote;

J'ai le Boeing 777-300ER de la Turkish Airlines (Project Opensky) et celui ci a un cockipt 2D.Je voulais savoir si il serais possible d'installer un cockpit 3D a la place.

voici le Fichier Aircraft:

[fltsim.0]
title=Project Opensky -- Boeing 777-300ER - Turkish
sim=Boeing 777-300ER General Electric 90-115B1
model=
panel=
sound=
texture=
checklists=
atc_airline=TURKISH
atc_id=VT-JEE
atc_flight_number=282
atc_heavy=1
atc_parking_types=GATE,RAMP,CARGO
atc_parking_codes=
ui_manufacturer=Project Opensky
ui_type=777-300ER
ui_variation=Turkish
visual_damage=1
description=Project Opensky Boeing 777-300\nVersion 2-2008.1.0\n\nModel Designers\n Hiroshi Igami\n Yosuke Ube\n\nMaster Textures\n Yosuke Ube\n\nFlight Dynamics Designer\n Brandon D. Henry\n\nFlight Dynamics Assistant\n Philip Foglar\n\nSound Designer\n Emil Serafino\n\nTechnical Resource\n Aaron Seymour\n\nTest Pilots\n Project Opensky Members\n\nMaximun Range:\n 7,930 nautical miles (14,685 km)\n\n\nTypical city pairs: \nSan Francisco - Tokyo\nTokyo - Singapore\n Honolulu - Seoul \n\nPainted by\n Philip Foglar ( [email protected] )
atc_id_color=0x00000000
atc_id_font=Verdana,-11,1,600,0


[weight_and_balance]
max_gross_weight = 660000
empty_weight = 347800
reference_datum_position = 0, 0, 0
empty_weight_CG_position = 0, 0, 0
empty_weight_pitch_MOI = 41600000
empty_weight_roll_MOI = 42000000
empty_weight_yaw_MOI = 67500000
empty_weight_coupled_MOI = 1000
max_number_of_stations = 7

station_load.0 = "4200, 70, 0, 5, 1st Class - 24 pax" //Weight (lbs), longitudinal, lateral, vertical positions from datum (feet)
station_load.1 = "9450, 40, 0, 5, Business Class - 54 pax" //Weight (lbs), longitudinal, lateral, vertical positions from datum (feet)
station_load.2 = "28875, -10, 0, 5, Econ Front - 165 pax" //Weight (lbs), longitudinal, lateral, vertical positions from datum (feet)
station_load.3 = "20125, -55, 0, 5, Econ Rear - 115 pax" //Weight (lbs), longitudinal, lateral, vertical positions from datum (feet)
station_load.4 = "11250, 50, 0, 0, Fore Cargo" //Weight (lbs), longitudinal, lateral, vertical positions from datum (feet)
station_load.5 = "11250, -50, 0, 0, Aft Cargo " //Weight (lbs), longitudinal, lateral, vertical positions from datum (feet)
station_load.6 = "1000, -70, 0, 0, Bulk Cargo" //Weight (lbs), longitudinal, lateral, vertical positions from datum (feet)


[lights]

//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing

light.0 = 1, 28.5, 0, 12.4, Opensky_beacon
light.1 = 1, 4.75, 0, -9, Opensky_beacon
light.2 = 3, -127, 0, 4.5, Opensky_nav_yellow
light.3 = 8, 32.7, -10.1, 1.3, Opensky_nav_yellow
light.4 = 8, 32.7, 10.1, 1.3, Opensky_nav_yellow
light.5 = 4, 105, 0, 5.4, Opensky_747_vclight
light.6 = 2, -127.9, 0, 8.5, fx_strobeh
light.7 = 4, 105, -2.2, 5.328, Opensky_747_vclight
light.8 = 4, 105, 2.2, 5.328, Opensky_747_vclight
light.9 = 8, 12.5, 23, 0, Opensky_nacelle_refl
light.10 = 8, 12.5, -23, 0, Opensky_nacelle_refl
light.11 = 8, 25, 30, 0, Opensky_wing_light
light.12 = 8, 25, -30, 0, Opensky_wing_light
light.13 = 8, 0, 56, 0, Opensky_wing_light
light.14 = 8, 0, -56, 0, Opensky_wing_light

[GeneralEngineData]

//0=Piston, 1=Jet, 2=None, 3=Helo-Turbine, 4=Rocket, 5=Turboprop
engine_type = 1
fuel_flow_scalar = 0.735
min_throttle_limit = -0.32
engine.0 = 10.0, -32.583, -10.500
engine.1 = 10.0, 32.583, -10.500

[smokesystem]
smoke.0 = -15, 22, 32, Opensky_revspray
smoke.1 = -15, 22, -32, Opensky_revspray

[effects]
wake = fx_wake
water = fx_spray
dirt = fx_tchdrt
concrete = opensky_sparks, 1
touchdown = fx_tchdwn, 1
windshield_rain_effect_available = 1

[fuel]

//Longitudinal (feet), Lateral (feet), Vertical (feet), Usable(gallons), Unusable (gallons)

fuel_type = 2
number_of_tank_selectors = 3
electric_pump = 1

Center1 = 10, 0, -4, 14220, 10
LeftMain = -5, -35, 0, 6200, 6
LeftAux = -10, -49.705, 0, 9300, 6
RightMain = -5, 35, 0, 6200, 6
RightAux = -10, 49.705, 0, 9300, 6


[contact_points]
static_pitch = 0
static_cg_height = 14.5
tailwheel_lock = 0
gear_system_type = 1
max_number_of_points = 17

//0 Class <0=none,1=wheel, 2=scrape, 3=float>
//1 Longitudinal Position (feet)
//2 Lateral Position (feet)
//3 Vertical Position (feet)
//4 Impact Damage Threshold (Feet Per Minute)
//5 Brake Map (0=None, 1=Left, 2=Right)
//6 Wheel Radius (feet)
//7 Steer Angle (degrees)
//8 Static Compression (feet) (0 if rigid)
//9 Max/Static Compression Ratio
//10 Damping Ratio (0=Undamped, 1=Critically Damped)
//11 Extension Time (seconds)
//12 Retraction Time (seconds)
//13 Sound Type
//14 Airspeed limit for retraction (KIAS)
//15 Airspeed that gear gets damage at (KIAS)

Point.0= 1, 92.500, 0.000, -16.750, 1881.102, 0, 2.0, 70.0, 1.200, 1.800, 1.5, 7.000, 9.000, 0.000, 240.000, 280.000
Point.1= 1, -10.900, -20.291, -18.250, 2574.803, 1, 2.6, 0.0, 1.700, 1.100, 1.5, 10.900, 11.900, 2.000, 240.000, 280.000
Point.2= 1, -10.900, 20.291, -18.250, 2574.803, 2, 2.6, 0.0, 1.700, 1.100, 1.5, 8.100, 13.100, 3.000, 240.000, 280.000
point.3 = 2, -44.167, -99.916, 10.000, 787.401, 0, 0, 0, 0, 0, 0, 0, 0, 5, 0, 0
point.4 = 2, -44.167, 99.916, 10.000, 787.401, 0, 0, 0, 0, 0, 0, 0, 0, 6, 0, 0
point.5 = 2, -108, 0, -0.6, 787.401, 0, 0, 0, 0, 0, 0, 0, 0, 9, 0, 0
point.6 = 2, 88.417, 0, -7.5, 787.401, 0, 0, 0, 0, 0, 0, 0, 0, 4, 0, 0
point.7 = 2, 10.000, -32.583, -8.500, 787.401, 0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 7.0, 0.0, 0.0
point.8 = 2, 10.000, 32.583, -8.500, 787.401, 0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 8.0, 0.0, 0.0
point.9 = 2, 14, -32.583, -13.3, 787.401, 0, 0, 0, 0, 0, 0, 0, 0, 7, 0, 0
point.10 = 2, 14, 32.583, -13.3, 787.401, 0, 0, 0, 0, 0, 0, 0, 0, 8, 0, 0
point.11 = 2, 105, 0, -4.5, 787.401, 0, 0, 0, 0, 0, 0, 0, 0, 4, 0, 0
point.12 = 2, 100, 0, 8.9, 787.401, 0, 0, 0, 0, 0, 0, 0, 0, 4, 0, 0
point.13 = 2, -127, 0, 41.3, 787.401, 0, 0, 0, 0, 0, 0, 0, 0, 9, 0, 0
point.14 = 2, -128.5, 35, 9, 787.401, 0, 0, 0, 0, 0, 0, 0, 5, 9, 0, 0
point.15 = 2, -128.5, -35, 9, 787.401, 0, 0, 0, 0, 0, 0, 0, 6, 9, 0, 0
point.16 = 2, -81.5, 0, -6, 787.401, 0, 0, 0, 0, 0, 0, 0, 0, 9, 0, 0


//[contact_points]
//static_pitch = 0
//static_cg_height = 16.4
//tailwheel_lock = 0
//gear_system_type = 1
//max_number_of_points = 28

//0 Class <0=none, 1=wheel, 2=scrape, 3=float>
//1 Longitudinal Position (feet)
//2 Lateral Position (feet)
//3 Vertical Position (feet)
//4 Impact Damage Threshold (Feet Per Minute)
//5 Brake Map (0=None, 1=Left, 2=Right)
//6 Wheel Radius (feet)
//7 Steer Angle (degrees)
//8 Static Compression (feet) (0 if rigid)
//9 Max/Static Compression Ratio
//10 Damping Ratio (0=Undamped, 1=Critically Damped)
//11 Extension Time (seconds)
//12 Retraction Time (seconds)
//13 Sound Type
//14 Airspeed limit for retraction (KIAS)
//15 Airspeed that gear gets damage at (KIAS)

//point.0 = 1, 91.243, -1.5, -16.5, 1881.102, 0, 1.6, 70, 1, 1.8, 2.4, 7, 9, 0, 240, 280
//point.1 = 1, 91.243, 1.5, -16.5, 1881.102, 0, 1.6, 70, 1, 1.8, 2.4, 7, 9, 0, 240, 280

//point.2 = 1, -14.800, -20.291, -17.800, 2574.803, 1, 2, 0, 1.245, 3.0, 2.2, 10.9, 11.9, 2, 240, 280
//point.3 = 1, -14.800, -15.291, -17.800, 2574.803, 1, 2, 0, 1.245, 3.0, 2.2, 8.1, 13.1, 3, 240, 280
//point.4 = 1, -9.800, -20.291, -17.800, 2574.803, 1, 2, 0, 1.245, 3.0, 2.2, 10.9, 11.9, 2, 240, 280
//point.5 = 1, -9.800, -15.291, -17.800, 2574.803, 1, 2, 0, 1.245, 3.0, 2.2, 8.1, 13.1, 3, 240, 280
//point.6 = 1, -5.000, -20.291, -17.800, 2574.803, 1, 2, 0, 1.245, 3.0, 2.2, 10.9, 11.9, 2, 240, 280
//point.7 = 1, -5.000, -15.291, -17.800, 2574.803, 1, 2, 0, 1.245, 3.0, 2.2, 8.1, 13.1, 3, 240, 280
//point.8 = 1, -14.800, 20.291, -17.800, 2574.803, 2, 2, 0, 1.245, 3.0, 2.2, 10.9, 11.9, 2, 240, 280
//point.9 = 1, -14.800, 15.291, -17.800, 2574.803, 2, 2, 0, 1.245, 3.0, 2.2, 8.1, 13.1, 3, 240, 280
//point.10 = 1, -9.800, 20.291, -17.800, 2574.803, 2, 2, 0, 1.245, 3.0, 2.2, 10.9, 11.9, 2, 240, 280
//point.11 = 1, -9.800, 15.291, -17.800, 2574.803, 2, 2, 0, 1.245, 3.0, 2.2, 8.1, 13.1, 3, 240, 280
//point.12 = 1, -5.000, 20.291, -17.800, 2574.803, 2, 2, 0, 1.245, 3.0, 2.2, 10.9, 11.9, 2, 240, 280
//point.13 = 1, -5.000, 15.291, -17.800, 2574.803, 2, 2, 0, 1.245, 3.0, 2.2, 8.1, 13.1, 3, 240, 280


//point.14 = 2, -44.167, -99.916, 10.000, 787.401, 0, 0, 0, 0, 0, 0, 0, 0, 5, 0, 0
//point.15 = 2, -44.167, 99.916, 10.000, 787.401, 0, 0, 0, 0, 0, 0, 0, 0, 6, 0, 0
//point.16 = 2, -108, 0, -0.6, 787.401, 0, 0, 0, 0, 0, 0, 0, 0, 9, 0, 0
//point.17 = 2, 88.417, 0, -7.5, 787.401, 0, 0, 0, 0, 0, 0, 0, 0, 4, 0, 0
//point.18 = 2, 10.000, -32.583, -8.500, 787.401, 0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 7.0, 0.0, 0.0
//point.19 = 2, 10.000, 32.583, -8.500, 787.401, 0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 8.0, 0.0, 0.0
//point.20 = 2, 14, -32.583, -13.3, 787.401, 0, 0, 0, 0, 0, 0, 0, 0, 7, 0, 0
//point.21 = 2, 14, 32.583, -13.3, 787.401, 0, 0, 0, 0, 0, 0, 0, 0, 8, 0, 0
//point.22 = 2, 105, 0, -4.5, 787.401, 0, 0, 0, 0, 0, 0, 0, 0, 4, 0, 0
//point.23 = 2, 100, 0, 8.9, 787.401, 0, 0, 0, 0, 0, 0, 0, 0, 4, 0, 0
//point.24 = 2, -127, 0, 41.3, 787.401, 0, 0, 0, 0, 0, 0, 0, 0, 9, 0, 0
//point.25 = 2, -128.5, 35, 9, 787.401, 0, 0, 0, 0, 0, 0, 0, 5, 9, 0, 0
//point.26 = 2, -128.5, -35, 9, 787.401, 0, 0, 0, 0, 0, 0, 0, 6, 9, 0, 0
//point.27 = 2, -81.5, 0, -6, 787.401, 0, 0, 0, 0, 0, 0, 0, 0, 9, 0, 0


[keyboard_response]
elevator = 100.000, 200.000
aileron = 100.000, 200.000
rudder = 100.000, 200.000


[forcefeedback]
gear_bump_nose_magnitude = 6000
gear_bump_nose_direction = 18000
gear_bump_nose_duration = 250000
gear_bump_left_magnitude = 6000
gear_bump_left_direction = 35500
gear_bump_left_duration = 250000
gear_bump_right_magnitude = 6000
gear_bump_right_direction = 00500
gear_bump_right_duration = 250000
ground_bumps_magnitude1 = 3250
ground_bumps_angle1 = 8900
ground_bumps_intercept1 = 5.0
ground_bumps_slope1 = 0.48
ground_bumps_magnitude2 = 750
ground_bumps_angle2 = 9100
ground_bumps_intercept2 = 0.075
ground_bumps_slope2 = 1.0
crash_magnitude1 = 10000
crash_direction1 = 01000
crash_magnitude2 = 10000
crash_direction2 = 9000
crash_period2 = 75000
crash_duration2 = 2500000

[airplane_geometry]
wing_area = 4605.000
wing_span = 205
wing_root_chord = 50.000
wing_dihedral = 6.218
wing_incidence = 1.000
wing_twist = -0.500
oswald_efficiency_factor = 0.600
wing_winglets_flag = 1
wing_sweep = 35
wing_pos_apex_lon = 30.000
wing_pos_apex_vert = 0.000
htail_area = 1291
htail_span = 70
htail_pos_lon = -96.5
htail_pos_vert = 5
htail_incidence = 0.000
htail_sweep = 40.000
vtail_area = 573.000
vtail_span = 35
vtail_sweep = 45
vtail_pos_lon = -85
vtail_pos_vert = 8.800
elevator_area = 137.000
aileron_area = 68.000
rudder_area = 232.000
elevator_up_limit = 24.000
elevator_down_limit = 18.000
aileron_up_limit = 24.000
aileron_down_limit = 18.000
rudder_limit = 32.000
elevator_trim_limit = 16.000
spoiler_limit = 45.000
aileron_to_spoileron_gain = 1.000
spoiler_handle_available = 1
min_ailerons_for_spoilerons = 12.000
min_flaps_for_spoilerons = 0
spoilerons_available = 1
auto_spoiler_available=1
spoiler_extension_time=2.500000
positive_g_limit_flaps_up=4.000000
positive_g_limit_flaps_down=3.000000
negative_g_limit_flaps_up=-3.000000
negative_g_limit_flaps_down=-2.000000

[electrical]
max_battery_voltage = 24
generator_alternator_voltage = 28
max_generator_alternator_amps = 60
engine_generator_map = 1,1
electric_always_available = 0
flap_motor = 0, 5, 17
gear_motor = 0, 5, 17
autopilot = 0, 5, 17
avionics_bus = 0, 5, 17
avionics = 1, 5, 17
pitot_heat = 0, 2, 17
additional_system = 0, 2, 17
marker_beacon = 1, 2, 17
gear_warning = 0, 2, 17
fuel_pump = 0, 5, 17
starter1 = 0, 20, 17
light_nav = 0, 5, 17
light_beacon = 0, 5, 17
light_landing = 0, 5, 17
light_taxi = 0, 5, 17
light_strobe = 0, 5, 17
light_panel = 0, 5, 17

[flight_tuning]
cruise_lift_scalar=1.00
parasite_drag_scalar=0.55
induced_drag_scalar=0.88
elevator_effectiveness=1.00
aileron_effectiveness=1.60
rudder_effectiveness=1.00
pitch_stability=1.00
roll_stability=1.00
yaw_stability=1.00
elevator_trim_effectiveness=0.40
aileron_trim_effectiveness=0.50
rudder_trim_effectiveness=0.50

[General]
performance=Passengers\n3-class conf: 301 \n2-class conf: N/A \n1-class conf: N/A\n\nCargo\n14 LD-3 containers aft \n600 cubic Ft (17 cubic m)\nTotal lower hold volume: 7,120 cu ft \n\nDimensions\nSpan 212 ft 7 in\nLength 242 ft 4 in\nHeight 61 ft 5 in \n (--max 58 ft 8 in--min)\n\nEngines: General Electric 90-115B1\nTO Thrust Rating: 115,100 lb\n\nMax Fuel Cap.: 47,890 gal\nMaxTOW: 775,000 lb\nZFW: 524,000 lb\n\nMax Range: 7,930 nautical miles (14,685 km)\nTypical Cruise Speed \n @ FL350: M.84
atc_type=BOEING
atc_model=B773
editable=0
Category=airplane

[pitot_static]
vertical_speed_time_constant=999 //Increasing this value will cause a more instantaneous reaction in the VSI
pitot_heat=1.000000

[jet_engine]
thrust_scalar=1.000

[TurbineEngineData]
bypass_ratio=6.400000
fuel_flow_gain=0.001
inlet_area=65.962
rated_N2_rpm=29920.000
static_thrust=115100.000
afterburner_available=0
reverser_available=1

[Reference Speeds]
flaps_up_stall_speed=174.000
full_flaps_stall_speed=158.000
cruise_speed=485.00
max_indicated_speed=330.000000
max_mach=0.890020

[Views]
eyepoint=103.002, -1.756, 5.20

[autopilot]
autopilot_available=1
flight_director_available=1
default_vertical_speed=800.000
autothrottle_available=1
autothrottle_arming_required= 1
autothrottle_takeoff_ga= 1
autothrottle_max_rpm= 110.000
pitch_takeoff_ga=8.00 //0.000
use_no_default_pitch = 1 // 0 = Default to current pitch mode, 1 = No default pitch mode.
use_no_default_bank = 1 // 0 = Default to Wing Leveler mode, 1 = No default bank mode.
default_pitch_mode=0
default_bank_mode=0
max_pitch=10.000000
max_pitch_acceleration=1.000000
max_pitch_velocity_lo_alt=2.000000
max_pitch_velocity_hi_alt=0.300000
max_pitch_velocity_lo_alt_breakpoint= 7000.000000
max_pitch_velocity_hi_alt_breakpoint=24000.000000
max_bank=30.000000
max_bank_acceleration=1.200000
max_bank_velocity=2.000000
max_throttle_rate=0.024
nav_proportional_control=9.000000
nav_integrator_control=0.250000
nav_derivative_control=0.000000
nav_integrator_boundary=2.500000
nav_derivative_boundary=0.000000
gs_proportional_control=9.520000
gs_integrator_control=0.260000
gs_derivative_control=0.000000
gs_integrator_boundary=0.700000
gs_derivative_boundary=0.000000
yaw_damper_gain=1.000000

[Radios]
// Radio Type=availiable, standby frequency, has glide slope
Audio.1=1
Com.1=1, 1
Com.2=1, 1
Nav.1=1, 1, 1
Nav.2=1, 1, 0
Adf.1=1
Transponder.1=1
Marker.1=1

[flaps.0] //Inboard Trailing Edge
type = 1 // 1 - tail, 2 - lead
span-outboard = 4.2 // 0.0 .. 1.0
extending-time = 35 // seconds
flaps-position.0 = 0 // degrees
flaps-position.1 = 0 // degrees
flaps-position.2 = 5 // degrees
flaps-position.3 = 15 // degrees
flaps-position.4 = 20 // degrees
flaps-position.5 = 25 // degrees
flaps-position.6 = 30 // degrees
damaging-speed = 260 // KIAS
blowout-speed = 300 // KIAS
lift_scalar = 0.82
drag_scalar = 0.95
pitch_scalar= 0.60
system_type = 1 //Hydraulic

[flaps.1] //Outboard Trailing Edge
type = 1 // 1 - tail, 2 - lead
span-outboard = 4.8 // 0.0 .. 1.0
extending-time = 35 // seconds
flaps-position.0 = 0 // degrees
flaps-position.1 = 5 // degrees
flaps-position.2 = 10 // degrees
flaps-position.3 = 15 // degrees
flaps-position.4 = 20 // degrees
flaps-position.5 = 25 // degrees
flaps-position.6 = 30 // degrees
damaging-speed = 260 // KIAS
blowout-speed = 300 // KIAS
lift_scalar = 0.40
drag_scalar = 0.50
pitch_scalar= 0.30
system_type = 1 //Hydraulic

[flaps.2] //Inboard Leading Edge Slats
type = 2 // 1 - tail, 2 - lead
span-outboard = 4.5 // 0.0 .. 1.0
extending-time = 18 // seconds
flaps-position.0 = 0 // degrees
flaps-position.1 = 5 // degrees
flaps-position.2 = 5 // degrees
flaps-position.3 = 5 // degrees
flaps-position.4 = 5 // degrees
flaps-position.5 = 20 // degrees
flaps-position.6 = 20 // degrees
damaging-speed = 260 // KIAS
blowout-speed = 300 // KIAS
lift_scalar = 0.30
drag_scalar = 0.30
pitch_scalar= 0.30
system_type = 1 //Hydraulic

[direction_indicators]
direction_indicator.0=3,0

[brakes]
toe_brakes_scale=0.580
parking_brake=1
auto_brakes=4
[hydraulic_system]
electric_pumps=0
engine_map=1,1,0,0
normal_pressure=3000.000000
[stall_warning]
type=1
stick_shaker=1
[attitude_indicators]
attitude_indicator.0=1
[turn_indicators]
turn_indicator.0=1,0
[gear_warning_system]
gear_warning_available=0
pct_throttle_limit=0.099976
flap_limit_power=25.496622
flap_limit_idle=5.042029
[TailHook] // For opening cargo door.
tailhook_length=1 ;(feet)
tailhook_position = 0.0, 0.0, 0.0 ;(feet) longitudinal, lateral, vertical positions from datum
[folding_wings] // For opening main deck cargo door.
wing_fold_system_type = 4 ;0=None
fold_rates = 0.05,1.00 ;Percent per second
[exits]
number_of_exits = 4
exit_rate.0 = 0.10 ;Percent per second
exit_rate.1 = 0.08 ;Percent per second
exit_rate.2 = 0.10 ;Percent per second
exit_rate.3 = 0.08 ;Percent per second

[vacuum_system]
max_pressure=5.150000
vacuum_type=2
electric_backup_pressure=0.000000
engine_map=0,0,0,0
[pneumatic_system]
max_pressure=18.000000
bleed_air_scalar=1.000000
[deice_system]
structural_deice_type=0

En vous remerciant d'avance.
Avatar de l’utilisateur
TURKISH AIRLINES
 
Messages: 131
Inscription: 14 Aoû 2011, 14:41
Localisation: Paris

Re: Aide Cockpit 3D

Message non lupar Airlink » 06 Fév 2012, 20:10

Bonsoir,

Si tu as un autre Boeing 777-300ER, comme celui de la Flotte Emirates ou de la Flotte Egyptair, tu peux y intégrer le cockpit.

Exemple avec le 777-300ER Emirates.

- Se rendre dans le dossier : \Microsoft Games\Microsoft Flight Simulator X\SimObjects\Airplanes\Boeing 777-300ER Emirates

- Copier le dossier "panel"

- Coller le dossier "panel" dans le répertoire du 777-300ER Turkish Airlines.
Ne pas oublier de copier et remplacer les fichiers.


Et c'est tout. Grâce à cette technique, tu auras non seulement le cockpit 2D, mais aussi le 3D.

Bonne Soirée,

Amic'

Airlink :Smilcaptain2:
░░░░░░░░░░░░░░░░░░_________░░░░░░░░░░░░░░░░░░
░░░░░░░ Airlink ░░░░░░░░░|░░░░ [email protected] ░░░
░ bénévole rikoooo.com ░░░_|_░░░░ skype ✈ rikairlink ░░░░
░░░░░░░░░░░░░░░░░░O-(==)-O░░░░░░░░░░░░░░░░░░░
░\_____________________\o/_____________________/░░
Avatar de l’utilisateur
Airlink
Modérateur
 
Messages: 2959
Inscription: 22 Aoû 2011, 14:53
Localisation: Paris (14ème)
Médailles: 26
Bon Conseiller (3) Problème [Résolu] (1) Membre Vétéran Actif (1) Contributeur (1) Gagnant Concours (20)

Re: Aide Cockpit 3D

Message non lupar TURKISH AIRLINES » 06 Fév 2012, 22:06

Bonsoir et merci Airlink.

J'ai deja essayer cette astuce non seulement avec Emirates mais aussi avec Singapore Airlines,Thai Airways,Air France mais par contre Egypte Air j'ai pas tester.Je vais m'y coller de suite.

Bonne soirée.
Amicalement.


Je reviens apres avoir telecharger et essayer d'installer le cockpit de la flotte d'Egyptair mais celui la aussi ne fonctionne pas,mais par contre le cockpit 2D est bien installer,je comprend pas pourquoi le cockpit 3D ne s'installe pas :?

EDIT :

Bonjour Rikooonautes;
Je pense avoir trouver la raison pour n'ayant pas reussi a installer un cockpit dans mon B777-300ER,c'est tout simplement parceque c'est un avion FS2004(ou FS09 comme vous voulez :) )compatible FSX mais maintenant quand j'essaie d'installer un cockpit FS2004 mon avion disparait dans le menu de la page d'acceuil là ou ont selectionnent l'avion avec lequel ont veux voler.

Auriez vous une idée pour me venir en aide?

Rikoooalement :D
Avatar de l’utilisateur
TURKISH AIRLINES
 
Messages: 131
Inscription: 14 Aoû 2011, 14:41
Localisation: Paris

Re: Aide Cockpit 3D

Message non lupar serge30 » 08 Fév 2012, 17:15

Bonjour
Avant tout, inutile de se rendre dans le fichier aircraft.cfg, il n'y a rien à faire.
Pour avoir le 3D, il faut que le fichier model en soit équipé, ce qui veut dire qu'il faut le changer (Posky fournit un model pour le cockpit virtuel)
Ensuite il faut également récupérer le panel contenant le 2D et le 3D
Donc pour faire simple
remplacer le model (fichier)
puis le nouveau fichier panel


Je crois me souvenir que ces modifs sont faciles à trouver sur le site Posky


Bonne soirée
Avatar de l’utilisateur
serge30
 
Messages: 786
Inscription: 31 Oct 2011, 08:29
Médailles: 7
Bon Conseiller (4) Problème [Résolu] (2) Membre Vétéran Actif (1)

Re: Aide Cockpit 3D

Message non lupar TURKISH AIRLINES » 08 Fév 2012, 17:53

Merci Serge30 pour ta reponse ultra rapide :) par contre sauf erreur de ma part j'ai pas souvenir qu'il y'ai bien un fichier "model" dans le dossier de mon avion.Je vais voir ça ce soir et je te tiens au courant.

Merci encore

Bonne soirée egalement.

Re-bonsoir,J'ai reussie a installer le cockpit 3d que j'ai trouver dans le pack Air France que Rikoooo nous a mis a disposition mais j'ai un deuxieme probleme qui apparait,tout mon ecran est noir par contre le cockpit 2d fonctionne correctement et Gauge Recovery est sans succes.
Avatar de l’utilisateur
TURKISH AIRLINES
 
Messages: 131
Inscription: 14 Aoû 2011, 14:41
Localisation: Paris

Re: Aide Cockpit 3D

Message non lupar TURKISH AIRLINES » 10 Fév 2012, 15:09

Bonjour tout le monde:

Personne sait comment me venir en aide?
Avatar de l’utilisateur
TURKISH AIRLINES
 
Messages: 131
Inscription: 14 Aoû 2011, 14:41
Localisation: Paris

Re: Aide Cockpit 3D

Message non lupar serge30 » 10 Fév 2012, 16:28

Bonjour
Trés simple, il est complet avec VC, et avec la texture Turkish (je crois même 2)

http://www.flightsim.com/kdl.php?fid=157495

Bonne soirée
Avatar de l’utilisateur
serge30
 
Messages: 786
Inscription: 31 Oct 2011, 08:29
Médailles: 7
Bon Conseiller (4) Problème [Résolu] (2) Membre Vétéran Actif (1)


7 messages • Page 1 sur 1

Retourner vers Support et Questions FSX/P3D

Qui est en ligne

Utilisateurs parcourant ce forum: enzcor, Majestic-12 [Bot]

COM_PAYPLANS_LOGGER_CRON_START