Rikoooo.com

Bonjour à tous rikoooonautes !
Mon problème est le suivant : comment fait-on pour désactiver les son d'alerte (PULL UP, etc...) dans l'ec 145 de la sécurité civile pour fsx ???
Faut-il aller dans le "aircraft.cfg" pour éditer une commande ou autre chose?
Franchement j'en ai marre d'entendre "PULL UP ! PULL UP !" à chaque fois que j'essaye de me poser ou que je vole trop bas...
Si quelqu'un à la solution, je vous écoute !
Merci d'avance !
byloute 18

Salut,
vas dans le dossier de l'hélico, puis dans le dossier "sound". Tu dois éditer le sound.cfg ou supprimer les sons que tu ne veux plus.

Amicalement,romdu69.

Merci du conseil mais dans le dossier je n'ai ni "sound.cfg" ni les horribles sons dans le dossier de l'hélico.
C'est peut-être dans le répertoire "sound" de FSX et il y a sûrement une commande qui renvoie à ces sons dans "aircraft.cfg"
Mais quelle ligne, je sais pas.

Tu n'as vraiment rien dans le dossier sound?:dry:

C'est surement dans l'aicraft.cfg alors.

Amicalement,romdu69.

Oh ! Excuse-moi ! Si, j'ai un dossier sound, bien sûr, mais j'avais pas vu le sound.cfg !
Donc je l'ai ouvert mais je ne connais pas le nom des sons d'alerte...

Salut,
peut tu me coller ici le contenu du sound.cfg? As-tu d'autres fichiers dans le dossier Sound à part le Sound.cfg?

Amicalement,romdu69.

Dans le dossier sound j'ai plein de sons (start up, shut down, etc)
Voila une capture d'écran de tout ce que j'ai dans le dossier
[img]http://www.servimg.com/image_preview.ph ... u=14690729][img]http://i69.servimg.com/u/f69/14/69/07/29/sound10.png[/img]
(j'espère que la photo s'affiche)
Je te met en pièce jointe mon dossier sound.cfg

Salut,
je ne vois pas de pièce jointe, copie moi seulement le contenu ici.

Amicalement,romdu69.

Mais oui je suis ***
Voila !


New Sound System for Bell204/212 with fuel consumption By Manuel Gonzalez --Email,

Sound System #2

[fltsim]
product_code=FSIM

[SOUND_ENGINE]
number_of_engines=2
eng1_shutdown=shutdown
eng1_prop=PROP.1.00
eng1_jet_whine=JET_WHINE.1.00


[SHUTDOWN]
filename=shut_ec145_in
viewpoint=1
maximum_volume=8000
link=shutdown.1

[SHUTDOWN.1]
filename=shut_ec145_out
maximum_volume=9200
viewpoint=2


[wind_sound]
filename=wind3
minimum_volume = 5000
maximum_volume = 9000
minimum_speed = 0
maximum_speed = 80
minimum_rate = 0.75
maximum_rate = 1.00

[OVERSPEED_WARNING_SOUND]
filename=osp
maximum_volume=9100

[LEFT_TOUCHDOWN]
filename=t1

[RIGHT_TOUCHDOWN]
filename=t1

[CENTER_TOUCHDOWN]
filename=t1

[GROUND_ROLL]
filename=cnroll2
flags=125218
minimum_volume=6000
maximum_volume=10000
minimum_speed=3
maximum_speed=55
minimum_rate=0.80
maximum_rate=1.60
link=GROUND_ROLL2

[GROUND_ROLL2]
filename=cnroll
flags=6612
link=GROUND_ROLL3

[GROUND_ROLL3]
filename=cnroll3
flags=121300
link=GROUND_ROLL4

[GROUND_ROLL4]
filename=cnroll4
flags=512
link=GROUND_ROLL5

[GROUND_ROLL5]
filename=cnroll5
flags=1024
link=GROUND_ROLL6

[GROUND_ROLL6]
filename=cnroll6
flags=131072

[LEFT_WING_SCRAPE]
filename=smwngscr
minimum_speed=1
maximum_speed=60
minimum_rate=0.5
maximum_rate=2.0

[RIGHT_WING_SCRAPE]
filename=smwngscr
minimum_speed=1
maximum_speed=60
minimum_rate=0.5
maximum_rate=2.0

[FUSELAGE_SCRAPE]
filename=smblylnd
minimum_speed=1
maximum_speed=60
minimum_rate=0.5
maximum_rate=2.0

[CRASH_SOUND]
filename=hncrash1,hncrash2,hncrash3,hncrash4

[splash_SOUND]
filename=hnsplas1,hnsplas2,hnsplas3



[PROP.1.00]
filename=
flags=4
viewpoint=1
rparams=0.405000,0.955000,0.838000,1.398000
vparams=0.000000,0.000000,0.750000,0.000000,0.800000,11.200000,0.843000,65.600000,1.000000,80.800000,1.000000,80.800000,1.000000,80.800000,1.000000,80.800000
link=PROP.1.01

[PROP.1.01]
filename=
flags=4
viewpoint=1
rparams=0.162000,0.955000,0.456000,1.149000
vparams=0.039000,0.000000,0.178000,13.600000,0.266000,53.600000,0.387000,57.600000,0.514000,13.600000,0.745000,0.000000,0.819000,0.000000,0.819000,0.000000
link=PROP.1.02


[PROP.1.02]
filename=
flags=4
viewpoint=1
rparams=0.405000,0.955000,0.838000,1.398000
vparams=0.000000,0.000000,0.266000,0.000000,0.417000,13.600000,0.537000,59.200000,0.711000,68.000000,0.799000,12.000000,0.993000,0.000000,1.000000,0.000000
link=PROP.1.03

[PROP.1.03]
filename=
flags=4
viewpoint=1
rparams=0.405000,0.955000,0.838000,1.398000
vparams=0.039000,0.000000,0.178000,13.600000,0.266000,53.600000,0.387000,57.600000,0.514000,13.600000,0.745000,0.000000,0.819000,0.000000,0.819000,0.000000
link=PROP.1.04


[PROP.1.04]
filename=
flags=4
viewpoint=2
rparams=0.405000,0.955000,0.838000,1.398000
vparams=0.000000,0.000000,0.750000,0.000000,0.800000,11.200000,0.843000,65.600000,1.000000,80.800000,1.000000,80.800000,1.000000,80.800000,1.000000,80.800000
link=PROP.1.05

[PROP.1.05]
filename=
flags=4
viewpoint=2
rparams=0.162000,0.955000,0.456000,1.149000
vparams=0.039000,0.000000,0.178000,13.600000,0.266000,53.600000,0.387000,57.600000,0.514000,13.600000,0.745000,0.000000,0.819000,0.000000,0.819000,0.000000
link=PROP.1.06

[PROP.1.06]
filename=
flags=4
viewpoint=2
rparams=0.009000,0.785000,0.671000,1.084000
vparams=0.000000,0.000000,0.002000,0.000000,0.005000,0.000000,0.241000,24.000000,0.333000,29.600000,0.407000,7.200000,0.546000,0.000000,0.887000,0.000000
link=PROP.1.07

[PROP.1.07]
filename=
flags=4
viewpoint=2
rparams=0.697000,0.955000,1.000000,1.176000
vparams=0.000000,0.000000,0.700000,0.000000,0.800000,11.200000,0.843000,65.600000,1.000000,80.800000,1.000000,80.800000,1.000000,80.800000,1.000000,80.800000




[JET_WHINE.1.00]
filename=strt_ec145_in
flags=0
viewpoint=1
rparams=0.405000,0.955000,0.838000,1.398000
vparams=0.039000,100.600000,0.178000,100.600000,0.266000,90.600000,0.387000,50.600000,0.514000,6.600000,0.600000,0.000000,0.700000,0.000000,0.700000,0.000000
link=JET_WHINE.1.01

[JET_WHINE.1.01]
filename=
flags=0
viewpoint=1
rparams=0.162000,0.955000,0.456000,1.149000
vparams=0.000000,0.000000,0.65000,0.000000,0.66100,25.000000,0.750000,60.000000,0.819000,0.7500000,0.819000,0.000000
link=JET_WHINE.1.02

[JET_WHINE.1.02]
filename=idle_ec145_in
flags=0
viewpoint=1
rparams=0.405000,0.955000,0.838000,1.398000
vparams=0.000000,0.000000,0.55000,0.000000,0.56100,1.500000,0.750000,5.900000,0.843000,5.900000,1.000000,11.200000,1.000000,11.200000,1.000000,11.200000,1.000000,11.200000
link=JET_WHINE.1.03

[JET_WHINE.1.03]
filename=flight_ec145_in
flags=0
viewpoint=1
rparams=0.000000
vparams=0.000000,0.000000,0.656000,0.000000,0.780000,11.200000,0.843000,65.600000,1.000000,80.800000,1.000000,80.800000,1.000000,80.800000,1.000000,80.800000
link=JET_WHINE.1.04


[JET_WHINE.1.04]
filename=strt_ec145_out
flags=4
viewpoint=2
rparams=0.405000,0.955000,0.838000,1.398000
vparams=0.039000,100.600000,0.178000,100.600000,0.266000,90.600000,0.387000,77.600000,0.514000,33.600000,0.600000,0.000000,0.700000,0.000000,0.700000,0.000000
link=JET_WHINE.1.05

[JET_WHINE.1.05]
filename=
flags=4
viewpoint=2
rparams=0.162000,0.955000,0.456000,1.149000
vparams=0.000000,0.000000,0.65000,0.000000,0.66100,25.000000,0.750000,60.000000,0.819000,0.7500000,0.819000,0.000000
link=JET_WHINE.1.06

[JET_WHINE.1.06]
filename=idle_ec145_out
flags=4
viewpoint=2
rparams=0.405000,0.855000,0.838000,1.398000
vparams=0.000000,0.000000,0.55000,0.000000,0.56100,35.000000,0.750000,90.600000,0.843000,65.200000,1.000000,11.200000,1.000000,11.200000,1.000000,11.200000,1.000000,11.200000
link=JET_WHINE.1.07

[JET_WHINE.1.07]
filename=flight_ec145_out
flags=4
viewpoint=2
rparams=0.162000,0.755000,0.456000,1.000000
vparams=0.000000,0.000000,0.656000,0.000000,0.780000,1.200000,0.843000,35.600000,1.000000,95.800000,1.000000,95.800000,1.000000,95.800000,1.000000,95.800000

[AP_DISENGAGE_SOUND]
filename=CDS_Reset

[GEAR_DOWN]
filename=descend_ec145_in
minimum_volume=10000

[GEAR_UP]
filename=descend_ec145_in
minimum_volume=10000

[EXIT_OPEN]
filename=ec145_door_open

[EXIT_CLOSE]
filename=ec145_door_close

[FLAPS]
filename=descend_ec145_in
minimum_volume=10000

[GYRO_SOUND]
filename=as350_gyro
maximum_volume=8800

____________
C'est tout ce qu'il y a.

Salut,
je t'explique la manipulation à faire:
Comme tu peux voir, sous chaque nouveau paragraphe, tu as "filename=...".
Prenons par exemple le premier paragraphe:

[SHUTDOWN]
filename=shut_ec145_in
viewpoint=1
maximum_volume=8000
link=shutdown.1

Le filename est "shut_ec145_in", donc tu vas dans le dossier sound de l'hélico et tu lit le fichier "shut_ec145_in". Si tu ne veux plus ce son, tu supprime le paragraphe, sinon tu le laisse. Tu n'as plus qu'à faire ça avec tous les paragraphes.

Regardes ce paragraphe:

[OVERSPEED_WARNING_SOUND]
filename=osp
maximum_volume=9100

C'est celui qui indique la "survitesse", donc tu peux le supprimer, et ensuite supprimer tous les pargraphes qui ne te plaisent plus, ensuite tu enregistres le sound.cfg, et plus de sons gênants!:woohoo:

Amicalement,romdu69.