Est-ce-que j'ai bon ?
Nr. Question / Reply
1 Q: In the flight plan, the letter(s) used for expressing Flight Level and Altitude are shown in terms of?
R:
“A” Followed by four digits and “F” followed by three digits
“F” followed by three digits and “A” followed by three digits
“F” followed by four digits and “A” followed by three digits
“FL” followed by five digits and “AL” followed by five digits
“FL” followed by three digits and “AL” followed by three digits
Selected: 2
2 Q: What is the main function of the controller profile?
R:
Easily transfers your favorite profile to another computer
Easily makes IvAc remember your Callsign
Easily makes IvAc save your VID and PWD
To store the settings of that Profile
Selected: 4
3 Q: Which type of speed is indicated on the IvAc screen for each aircraft?
R:
KIAS
CAS
GS
TAS
Selected: 2
4 Q: What software is used on the IVAO system for voice communications?
R:
TeamSpeak 2.x
Teamspeak 3.x
Skype
MSN messenger
Selected: 1
5 Q: Which of the following correctly lists special purpose codes that are to be used in conjunction with Secondary Surveillance Radar (SSR)?
R:
Distress 7500. Hijacking 7700. Communication failure 7600.
Distress 7700. Hijacking 7500. Communication failure 7600.
Distress 7700. Hijacking 7600. Communicaton failure 7500.
Distress 7600. Hijacking 7500. Communication failure 7700.
Selected: 2
6 Q: How do you search for (select) a specific aircraft in radar range?
R:
Search on IVAO Network Pages
Type .s 'CALLSIGN'
Search on ServInfo
Type .search 'CALLSIGN'
Selected: 4
7 Q: How do you handle a handoff to an adjacent controller?
R:
Right Click on the ACFT, Transfer and Select the applicable ATC position
Coordination between the ATC
Via the Broadcast msg
Via GUARD msg
Selected: 1
8 Q: What is GUARD frequency (121.50) used for?
R:
Emergencies only
An extra ATC coordination Channel
Pilot communication in uncontrolled airspace
Exam announcements
Used to contact pilots if FORCE ACT does not work
Selected: 1
9 Q: If a country has an approved ICAO language, which language(s) must be used?
R:
English as the primary language and country language as secondary language
Any approved ICAO language
ICAO country language as the primary language and english as secondary
English only
Selected: 3
10 Q: Looking at the label taken from IvAc, what does the letter A indicate?
R:
Controller is a AS1
The selected active aircraft is a category A
ATC is controlling airspace Class A
Current ATIS has the reference ALFA
Selected: 4
11 Q: An aircraft enters my controlled airspace and contacts me. I should (regarding IvAc, not communications)..
R:
do nothing
assume the aircraft, so other controllers know I took control of it
assume the aircraft to make sure I can perform actions and to inform other controllers I have control of it
assume the aircraft to make sure I can perform actions
Selected: 2
12 Q: The Cleared Flightlevel, Waypoint and Speed are used for...
R:
to remember what clearances I've issued
informing other controllers about the clearances I've issued to a plane
they are of no use
informing other controllers about the clearances I've issued to a plane and to remember what clearances I've issued
Selected: 4
13 Q: In the flight plan, the units for fuel endurance E, are measured in?
R:
Minutes only, e.g. 150
Hours and Minutes, e.g. 0230
Hours only, e.g. 02.50
Hours, Minutes, and Seconds, e.g. 023030
Selected: 3
14 Q: In area without air traffic control pilot should :
(A) Monitor UNICOM 122.8 MHz
(B) Check ATC on a regular basis
(C) Contact ATC service prior to entering his controlled zone
(D) Contact ATC only when requested to do so
The combination regrouping the correct answers is :
R:
A and D
A, B and C
A,B, and D
B and D
Selected: 1
15 Q: For what flights does the pilot need to file a flightplan?
R:
All flights: IFR, VFR, or composite
IFR flights only
Filing a flightplan is optional
VFR flights only
Selected: 1
16 Q: Is GUARD available for controller coordination?
R:
No
Yes, but only in case the controller is out of radar range
Yes
Selected: 3
17 Q: What is the meaning of ATIS?
R:
Automatic Terminal Information Service
Automatic Traffic Information Service
Automatic Terminal Information System
Automatic Traffic Information System
Selected: 1
18 Q: When connecting as a controller, what is the minimum time you should plan to stay in an ATC position?
R:
1 hour
4 hours
2 hours
30 minutes
10 minutes
Selected: 4
19 Q: Can the FlightStrip window be moved outside the IvAc window?
R:
Only when using a second monitor
No
Yes
Selected: 3
20 Q: If an aircraft label has a dash "-" in the top line, what does it mean?
R:
The pilot can receive and transmit via voice
The pilot can receive voice but not transmit
The transponder is inoperative
The pilot is text only
Selected: 3
© 1998-2014 - IVAO - All Rights Reserved
