- Posts: 3
- Thank you received: 0
Question A320 Family Ignition Switch
I've used the A320 family download for FSX for the past, roughly, two years without issue.
I've recently upgraded to P3D v4.3 and while the planes load, the "ignition switch" will not turn whatsoever. So, I cannot start the engines.
Any information on this or help?
I have just done a test and everything was working well, however, I used the ignition switch from the 2D panel instead of the virtual cockpit, try like me and you issue should be resolved. CTRL+E will also do the trick
Erik - General Administrator - Always happy to help
I will try that tonight or tomorrow. I never thought about using the 2D panel; I forgot haha
I did "map" the switch with a simple click of the 'I' key on the keyboard for Master Ignition Switch (On) but there isn't an option to map a key to turn it off. However, I could care less if It switches to "off" anyway.
One last thing, and about the A320 family but not about the switch: in FSX the cameras were zoomable with the spacebar and mouse wheel. Only several camera views now allow this in P3D v4.3 Again, it doesn't make anything inoperable but for instance in FSX I was able to reposition the wing cameras (exterior) with both the mouse zoom as well as the Control/Shift/Enter keys. Any override to this? See the attached picture. In FSX I was able to use the mouse wheel to zoom out and then use the Control/Shift/Enter keys to move the camera down to the engine. In essence, I made my own camera views and then just kept saving the flight so the cameras wouldn't reset.
Thanks for the help with the switch!
- Not Allowed: to create new topic.
- Not Allowed: to reply.
- Not Allowed: to add attachements.
- Not Allowed: to edit your message.