Languages
Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1
  • 2

TOPIC:

Concorde Historical Pack not flyable due to shakes and other flight dynamics 3 weeks 2 days ago #1920

Hi all! The severe shaking and control issue upon takeoff is still in effect for the new Concorde.. This plane is unflyable at this time in spite of the 7/20 .mdl update. Its a great looking piece of work! Please to the developers take another look. Can't wait to fly it! Cheers!

Please Log in or Create an account to join the conversation.

Concorde Historical Pack not flyable due to shakes and other flight dynamics 2 weeks 5 days ago #1924

I found the same problem also the engines shut down for no reason and the 11+ degree nose up attitude in cruise and the COG doesn't work. A poor piece of software on Rikoooo's part.
I've gone back to the Concorde reworked version until ALL the problems are sorted with this.

Please Log in or Create an account to join the conversation.

Concorde Historical Pack not flyable due to shakes and other flight dynamics 2 weeks 4 days ago #1925

Hi, thanks for your feedback,
The problem here is that I have other users who say everything work fine, So I need more people to come here and explain to me if they have issues or not. I personally have no severe shaking and control issue upon takeoff, no engines shut down. I try to reproduce your issues without success. So l'I'm thinking your issues may come from a third party add-on but I can't be sure. Also, EZdok camera add-on can cause severe shaking.
Erik - General Administrator - Always happy to help

Please Log in or Create an account to join the conversation.

Last edit: by rikoooo.

Concorde Historical Pack not flyable due to shakes and other flight dynamics 2 weeks 3 days ago #1927

I am running FSX acceleration with ALL aircraft add ons from rikoooo because they are USUALLY the most reliable.
I removed ALL other addons ( which took me over 5 hours) and installed just this addon and had the exact same problem, disproving your theory of a 3rd party addon.

Please Log in or Create an account to join the conversation.

Concorde Historical Pack not flyable due to shakes and other flight dynamics 2 weeks 3 days ago #1928

Hi,
I would really appreciate if you could send me a video with those shakings, it would help me to debug your issue. But before that, could you try to takeoff with your joystick unplugged, use your keyboard instead. As well be sure to have the latest update which I have uploaded this morning. Thank you a lot

Help me to make it a great piece of software
Erik - General Administrator - Always happy to help

Please Log in or Create an account to join the conversation.

Concorde Historical Pack not flyable due to shakes and other flight dynamics 2 weeks 3 days ago #1929

I don't use a joystick to fly aircraft in FSX, engine shutting down seems to have been sorted but the Centre of gravity still DOESN'T work it stays at around 24.7% in cruise when it should be 54 to 55% in a cruise with the COG in the flight engineers panel armed, this in turn is keeping the afterburners lit at mach 2 and causing the speed to drop due the the high pitch up attitude of the nose at mach 2.04 @ 60,000 feet. This IS after downloading the update that you uploaded this morning. I can not figure out what is wrong unless it's something that I don't know about regarding the COG configuration. I have gone as far as downloading a copy of the British Airways pilots operation hand book and followed it to the letter in accordance with Concorde S.O.P's, my next move for advice will be to contact Captain Bannister, Chief Concorde pilot for advice to make sure it ISN'T something wrong I'm doing.
Attachments:

Please Log in or Create an account to join the conversation.

Last edit: by PAUL1984.

Concorde Historical Pack not flyable due to shakes and other flight dynamics 2 weeks 3 days ago #1930

Hi Eric. Thx for your efforts here. It's a great Rikooo addition. Here's my experience...

I run P3Dv3 and v5. (32 and 64 bit variations). Both Concordes are installed. In v3 it seems to function fine, no shaking, but the liftoffs are exceptionally long and slow. In v5 I get very long runway runs also, I have the reheats on, very slow liftoffs again but it works. After around 250 knots it begins to shake up and down. As you continue to accelerate and gain altitude the shaking significantly worsens. i have no engine cut out issues. When I decelerate and descend the shaking lessens and again around 250 knots it stops. Potentially this is one of the best offerings at Rikooo so I am hopeful you find a remedy. Thanks so much for you interest. I will try and send a video....

All the best

Greg

Please Log in or Create an account to join the conversation.

Concorde Historical Pack not flyable due to shakes and other flight dynamics 2 weeks 3 days ago #1931

Tried to upload 2 Windows media .mov videos. The Rikooo portal won't take any format except JPG, JPEG, GIF, PNG, TXT, RTF, PDF, ZIP, TAR.GZ, TGZ, TAR.BZ2...thx.

Please Log in or Create an account to join the conversation.

Concorde Historical Pack not flyable due to shakes and other flight dynamics 2 weeks 3 days ago #1932

Hi S1vannah, thank you very much for your time and efforts,

Please upload your video here vimeo.com/upload (CHOOSE "NO THANKS" for a free account) then send me the link here. Or send me your video right from my Rikoooo page (message me) www.facebook.com/RikooooSimu/ .

I will try to fix most issues

PAUL1984 : Thank you for your screenshot it also helps to visualize the issue with the COG, I will look further into this.
Erik - General Administrator - Always happy to help

Please Log in or Create an account to join the conversation.

Concorde Historical Pack not flyable due to shakes and other flight dynamics 2 weeks 3 days ago #1933

Have this issue myself. I haven’t gotten around to it bust it was suggested it could be the A2A accufeel module affecting it. If it is not I may have to do some tweaking.
The following user(s) said Thank You: rikoooo

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
  • 2
Time to create page: 0.368 seconds