Before I start, kudos on the Air Force One 747-8I add-on, it's the best add-on aircraft I run into Two questions for the group:
1) I figured out how to assign a joystick button (the trigger) to have my AF1 engine thrust reverser engage but I can't get all 4 throttles to spool up together once in reverse? Without that I only get the minimum 10% reverse thrust, not much help on a 6'000ft runway grrrrr
2) I have a two monitor system, the main monitor has the regular screen VC etc, the second I use for various Instrument views, it takes a while to setup everytime I play, I've tried saving the flight once setup but it does not save the second screen setup. Any suggestions would be appreciated.
दुर्दैवाने, मी त्यास मदत करू शकत नाही तरीही ते मनोरंजक असेल. आपण योगायोगाने कोणाबरोबरही तपासणी केली आहे FSX एफबी वर गट? मला माहित आहे की मी अनेकांमध्ये आहे आणि ते ज्ञानवान असल्याचे दिसते (बहुतेक गोष्टींवर ...... इतरांवर ते एखाद्या बैलाच्या स्तनांइतकेच उपयुक्त असतात ....).
अमेरिकन पर्यंत कार
मालक / मुख्य कार्यकारी अधिकारी
अहो, द FSX assign matrix is rather low level for joy sticks and certain flight gear. But you could try the following...Go into the button and key assign and pan down to the section where you see F2 (The Reverse key ) Highlight that section, and push the trigger key on your joystick . If it reacts and you see it change, the trigger button will become the reverse key . Good luck
That is how I assigned the joystick button to reverse however even if I set repeat to max the reverse thrust never exceeds 10%, the minute I increase thrust using the joystick thrust control while in reverse it just cancels reverse and throttles up normally, not exactly what your looking for on a landing runout. Thanks for the input thou, I appreciate it!!!!