bonjour cher rikoooonautes,
j'ai une question a propos des passerelles dans FSX (ne vous inquietez pas , je ne vais
pas demander comment les appeler ! ), je sais qu'avec les avions par défaut
on peut appeler les passerelles , mais avec la plupart des avions téléchargés , on ne peut
pas les appeler , et je sais qu'il faut ajouter quelques lignes dans le "aircraft.cfg",
mais justement , quesqu'il faut ajouter et dans quelle partie du "aircraft.cfg" ?
Je vous remercie exrèmement d'avance , et bons vols !
passerelles pour avions téléchargés
-
- New Member
- Messages : 2
- Enregistré le : 13 déc. 2009, 23:35
- Simulateur le plus utilisé : FSX
- Localisation : montpellier
Re: passerelles pour avions téléchargés
Salut Philou, je me posai la meme question et j'ai trouvé ce tuto, et ca fonctionne très bien!!
Voici le détail...
Adapter les passerelles à vos appareils
Voici la méthode pour adpater les passerelles à vos appareils et obtenir du catering pas la même occasion.
Il vous faut éditer le fichier "Aircraft.cfg" de l'appareil à modifier.
Ajouter les ligne suivantes:
[exits]
number_of_exits=2 nombre de portes à l'appareil (normalement inclus dans la modélisation de l'appareil)
exit_rate.0=0.25 vitesse d'ouverture des portes
exit.0 = 0.25, 67.5, -8.75, 8.25, 0
exit_rate.1=0.25
Dans la ligne exit.0 = 0.25, 67.5, -8.75, 8.25, 0, voici la signification des valeurs:
exit.0 0=porte principale, 1=cargo, 2=issue de secours
0.25 est le pourcentage par seconde d'ouverture de la porte, 1.0 grand ouvert.
67.5 Distance X par rapport au centre de l'appareil
-8.75 Distance Y par rapport au centre de l'appareil
8.25 Distance Z par rapport au centre de l'appareil
Le superbe MD83 flythemaddog ne possédait pas cette fonction.
On édite son aircraft.cfg, on vire ce qui existe entre [EXITS] et [KEYBOARD_RESPONSE], on remplace par:
[EXITS]
number_of_exits=2
exit.0=0.4, 57.2, -4.0, 2.0, 0
exit.1=0.4, -27.5, 4.5, -3.0, 1
exit.2=0.4, 10.5, 4.5, -3.0, 1
On sauvegarde, et maintenant voilà le travail avec "CTRL + J" pour les passerelles et "SHIFT+E+2" pour le catering:
MR.Gagira (ulovely) a préparé des modifications ou améliorations pour de nombreux appareils:
Quote:
for 747-400:
Replace the current exits section of the
aircraft.cfg with the following:
[exits]
number_of_exits = 2
exit.0 = 0.4, -30.30, -9.0, 0.88,0
exit.1 = 0.4, -146.0, 8.0, -7.5, 1
datum (feet), type (0=Main 1=Cargo 2=Emergency)
exit.2 = 0.4, -42.30, 9.0, -7, 2
for 757-200 fsx
Replace the current exits section of the
aircraft.cfg with the following:
[exits]
number_of_exits = 2
exit.0 = 0.1 , 30.000 , -3.500 , 3.600 , 0
exit.1 = 0.1 , -28.000 , 4.500 , -2.000 , 1
For 767-200 fsx
Replace the current exits section of the
aircraft.cfg with the following:
[exits]
number_of_exits = 2
exit.0= 0.10, 62.600, -7.000, 7.000, 0
exit.1= 0.09, -21.500, 5.500, -6.800, 1
For 737-800 fsx
Replace the current exits section of the
aircraft.cfg with the following:
[exits]
number_of_exits = 2
exit.0 = 0.4, 36.6, -5.0, 3.0, 0
exit.1 = 0.4, -38.5, 4.5, -3.0, 1
exit.2 = 0.4, 33.5, 3.5, -4.0, 2
For airbus a321 fsx
Replace the current exits section of the
aircraft.cfg with the following:
[exits]
number_of_exits = 3
exit.0 = 0.4, 45.50, -6.0, 7.0, 0
exit.1 = 0.4, -33.50, 5.85, 0.0, 1
exit.2 = 0.4, 29.90, 6.0, 1.0, 2
For DC10:
Replace the current exits section of the
aircraft.cfg with the following:
[exits]
number_of_exits = 3
exit.0 = 0.2, 70.75, -7.0, 6.30, 0
exit.1 = 0.1, -36.75, 6.50, -5.50, 1
exit_rate.2 = 100 ;Percent per second
exit_rate.3 = 100 ;Percent per second
For A340-500
Replace the current exits section of the
aircraft.cfg with the following:
[exits]
number_of_exits = 2
exit.0 = 0.4, 89.30, -9.0, 0.88,0
exit.1 = 0.4, -50.0, 8.5, -8.0, 1
exit.2 = 0.4, 4.30, 9.0, -7, 2
For A340-600
Replace the current exits section of the
aircraft.cfg with the following:
[exits]
number_of_exits = 2
exit.0 = 0.4, 107.30, -9.0, 0.88,0
exit.1 = 0.4, -57.0, 8.5, -8.0, 1
exit.2 = 0.4, 8.30, 9.0, -7, 2
A380-800:
[exits]
number_of_exits=2
exit.0 = 0.4, 94, -12, 10, 0
exit.1 = 0.4, -44, 7, -5, 1
777-300:
[exits]
number_of_exits=2
exit.0 = 0.4, 102, -8, 8, 0
exit.1 = 0.4, -47, 7, -3, 1
777-200:
[exits]
number_of_exits=2
exit.0 = 0.4, 84, -8, 7, 0
exit.1 = 0.4, -34, 7, -5, 1
MD11:
[exits]
number_of_exits=2
exit.0 = 0.4, 84, -10, 7, 0
exit.1 = 0.4, -45, 7, -5, 1
Un petit addon pour se promener autour de son appareil
Développé pour FSX, voici un petit addon qui permet de marcher autour de son appareil où dans son appreil avec une grande facilité. L'auteur, Marniftarr est russe et prépare une seconde version.
Quelques films de démo:
http://speedskater.ru/download/arccvid/EZwc01.wmv
http://speedskater.ru/download/arccvid/EZwc02.wmv
http://speedskater.ru/download/arccvid/EZwc03.wmv
le lien du programme
http://disk.tom.ru/l28n2ty/1/0e63c/EZdo … 20V1.2.zip
Si après installation, le logiciel vous déplais, éditez votre cameras.cfg et supprimser cette section:
Quote:
{CameraDefinition.20}
Title=World walk Camera
Guid={607C4520-CA6F-4135-AE10-8BF288380690}
Description=Ezdok Walk camera
Origin=Fixed
SnapPbhAdjust=Swivel
SnapPbhReturn=False
PanPbhAdjust=Swivel
PanPbhReturn=False
Track=none
ShowAxis=No
AllowZoom=Yes
InitialZoom=0.5
SmoothZoomTime=2
ShowWeather=Yes
XyzAdjust=True
Transition=Yes
ShowLensFlare=TRUE
Category=Custom
ClipMode=Spot
PitchPanRate=30
HeadingPanRate=75
PanAcceleratorTime=0
HotKeySelect=3
FixedLongitude=-119.891866631189
FixedLatitude=39.6643277545412
FixedAltitude=1540.91613816622
----------------------------------------------------------------------
Les avions
Où est le dossier Aircraft
Microsoft Flight Simulator XSimObjectsAirplanes
D'autre dossiers peuvent être déclarés dans le FSX.cfg en rajoutant les lignes et numéros:
[Main]
User Objects=Airplane, Helicopter
SimObjectPaths.0=SimObjectsAirplanes
SimObjectPaths.1=SimObjectsRotorcraft
SimObjectPaths.2=SimObjectsGroundVehicles
SimObjectPaths.3=SimObjectsBoats
SimObjectPaths.4=SimObjectsAnimals
SimObjectPaths.5=SimObjectsMisc
SimObjectPaths.6=Aircraft
De cette façon, on peut organiser "proprement" les fichiers avions: défaut, fsx, fs9, AI, etc... en créant des sous-répertoires et en les déclarant avec SimObjectPaths.nnn=
Voici le détail...
Adapter les passerelles à vos appareils
Voici la méthode pour adpater les passerelles à vos appareils et obtenir du catering pas la même occasion.
Il vous faut éditer le fichier "Aircraft.cfg" de l'appareil à modifier.
Ajouter les ligne suivantes:
[exits]
number_of_exits=2 nombre de portes à l'appareil (normalement inclus dans la modélisation de l'appareil)
exit_rate.0=0.25 vitesse d'ouverture des portes
exit.0 = 0.25, 67.5, -8.75, 8.25, 0
exit_rate.1=0.25
Dans la ligne exit.0 = 0.25, 67.5, -8.75, 8.25, 0, voici la signification des valeurs:
exit.0 0=porte principale, 1=cargo, 2=issue de secours
0.25 est le pourcentage par seconde d'ouverture de la porte, 1.0 grand ouvert.
67.5 Distance X par rapport au centre de l'appareil
-8.75 Distance Y par rapport au centre de l'appareil
8.25 Distance Z par rapport au centre de l'appareil
Le superbe MD83 flythemaddog ne possédait pas cette fonction.
On édite son aircraft.cfg, on vire ce qui existe entre [EXITS] et [KEYBOARD_RESPONSE], on remplace par:
[EXITS]
number_of_exits=2
exit.0=0.4, 57.2, -4.0, 2.0, 0
exit.1=0.4, -27.5, 4.5, -3.0, 1
exit.2=0.4, 10.5, 4.5, -3.0, 1
On sauvegarde, et maintenant voilà le travail avec "CTRL + J" pour les passerelles et "SHIFT+E+2" pour le catering:
MR.Gagira (ulovely) a préparé des modifications ou améliorations pour de nombreux appareils:
Quote:
for 747-400:
Replace the current exits section of the
aircraft.cfg with the following:
[exits]
number_of_exits = 2
exit.0 = 0.4, -30.30, -9.0, 0.88,0
exit.1 = 0.4, -146.0, 8.0, -7.5, 1
datum (feet), type (0=Main 1=Cargo 2=Emergency)
exit.2 = 0.4, -42.30, 9.0, -7, 2
for 757-200 fsx
Replace the current exits section of the
aircraft.cfg with the following:
[exits]
number_of_exits = 2
exit.0 = 0.1 , 30.000 , -3.500 , 3.600 , 0
exit.1 = 0.1 , -28.000 , 4.500 , -2.000 , 1
For 767-200 fsx
Replace the current exits section of the
aircraft.cfg with the following:
[exits]
number_of_exits = 2
exit.0= 0.10, 62.600, -7.000, 7.000, 0
exit.1= 0.09, -21.500, 5.500, -6.800, 1
For 737-800 fsx
Replace the current exits section of the
aircraft.cfg with the following:
[exits]
number_of_exits = 2
exit.0 = 0.4, 36.6, -5.0, 3.0, 0
exit.1 = 0.4, -38.5, 4.5, -3.0, 1
exit.2 = 0.4, 33.5, 3.5, -4.0, 2
For airbus a321 fsx
Replace the current exits section of the
aircraft.cfg with the following:
[exits]
number_of_exits = 3
exit.0 = 0.4, 45.50, -6.0, 7.0, 0
exit.1 = 0.4, -33.50, 5.85, 0.0, 1
exit.2 = 0.4, 29.90, 6.0, 1.0, 2
For DC10:
Replace the current exits section of the
aircraft.cfg with the following:
[exits]
number_of_exits = 3
exit.0 = 0.2, 70.75, -7.0, 6.30, 0
exit.1 = 0.1, -36.75, 6.50, -5.50, 1
exit_rate.2 = 100 ;Percent per second
exit_rate.3 = 100 ;Percent per second
For A340-500
Replace the current exits section of the
aircraft.cfg with the following:
[exits]
number_of_exits = 2
exit.0 = 0.4, 89.30, -9.0, 0.88,0
exit.1 = 0.4, -50.0, 8.5, -8.0, 1
exit.2 = 0.4, 4.30, 9.0, -7, 2
For A340-600
Replace the current exits section of the
aircraft.cfg with the following:
[exits]
number_of_exits = 2
exit.0 = 0.4, 107.30, -9.0, 0.88,0
exit.1 = 0.4, -57.0, 8.5, -8.0, 1
exit.2 = 0.4, 8.30, 9.0, -7, 2
A380-800:
[exits]
number_of_exits=2
exit.0 = 0.4, 94, -12, 10, 0
exit.1 = 0.4, -44, 7, -5, 1
777-300:
[exits]
number_of_exits=2
exit.0 = 0.4, 102, -8, 8, 0
exit.1 = 0.4, -47, 7, -3, 1
777-200:
[exits]
number_of_exits=2
exit.0 = 0.4, 84, -8, 7, 0
exit.1 = 0.4, -34, 7, -5, 1
MD11:
[exits]
number_of_exits=2
exit.0 = 0.4, 84, -10, 7, 0
exit.1 = 0.4, -45, 7, -5, 1
Un petit addon pour se promener autour de son appareil
Développé pour FSX, voici un petit addon qui permet de marcher autour de son appareil où dans son appreil avec une grande facilité. L'auteur, Marniftarr est russe et prépare une seconde version.
Quelques films de démo:
http://speedskater.ru/download/arccvid/EZwc01.wmv
http://speedskater.ru/download/arccvid/EZwc02.wmv
http://speedskater.ru/download/arccvid/EZwc03.wmv
le lien du programme
http://disk.tom.ru/l28n2ty/1/0e63c/EZdo … 20V1.2.zip
Si après installation, le logiciel vous déplais, éditez votre cameras.cfg et supprimser cette section:
Quote:
{CameraDefinition.20}
Title=World walk Camera
Guid={607C4520-CA6F-4135-AE10-8BF288380690}
Description=Ezdok Walk camera
Origin=Fixed
SnapPbhAdjust=Swivel
SnapPbhReturn=False
PanPbhAdjust=Swivel
PanPbhReturn=False
Track=none
ShowAxis=No
AllowZoom=Yes
InitialZoom=0.5
SmoothZoomTime=2
ShowWeather=Yes
XyzAdjust=True
Transition=Yes
ShowLensFlare=TRUE
Category=Custom
ClipMode=Spot
PitchPanRate=30
HeadingPanRate=75
PanAcceleratorTime=0
HotKeySelect=3
FixedLongitude=-119.891866631189
FixedLatitude=39.6643277545412
FixedAltitude=1540.91613816622
----------------------------------------------------------------------
Les avions
Où est le dossier Aircraft
Microsoft Flight Simulator XSimObjectsAirplanes
D'autre dossiers peuvent être déclarés dans le FSX.cfg en rajoutant les lignes et numéros:
[Main]
User Objects=Airplane, Helicopter
SimObjectPaths.0=SimObjectsAirplanes
SimObjectPaths.1=SimObjectsRotorcraft
SimObjectPaths.2=SimObjectsGroundVehicles
SimObjectPaths.3=SimObjectsBoats
SimObjectPaths.4=SimObjectsAnimals
SimObjectPaths.5=SimObjectsMisc
SimObjectPaths.6=Aircraft
De cette façon, on peut organiser "proprement" les fichiers avions: défaut, fsx, fs9, AI, etc... en créant des sous-répertoires et en les déclarant avec SimObjectPaths.nnn=
Re: passerelles pour avions téléchargés
Merci beaucoup jeff je me posais la même question